Steps to setup the MP200L terminal:

1.  Remove device and cord from the box and plug the cord in to an available USB port and into the terminal
2.  Hold the power button to power on the device
3. Once powered on, the device will search for available wifi networks automatically
4. Select your network and enter the password (Use numbers to cycle through upper and lower case letters and use the number "0" to enter special characters)
5. Once connected to the internet, enter the pairing code (this is provided by entering a CC payment into your software and selecting the "Chip" button)
6. The device will then say "Swipe, Dip, or Tap" which means its ready for a card. Cancel this first test transaction by hitting the red "X"
7. The terminal is now ready for normal use

Article ID: 36000112838